ABS Rod

Njirimara ngwaahịa ABS Rod:

---

1. Ike dị elu na ịdịte aka

The ABS Rod a na-emepụta ya site na iji ihe ndị dị elu, na-enye ike dị mma na ogologo oge iji nagide nrụgide na mmetụta dị iche iche. Ọ nwere ike ịrụ ọrụ n'okpuru nrụgide dị elu ka ọ na-ejigide arụ ọrụ ya.

 

2. Dị arọ ma dị mfe nhazi

Mkpanaka rọba ABS dị ntakịrị, na-eme ka ọ dị mfe iburu na nhazi. Enwere ike ịkpụ ya, gwuo ya, gbadaa, welded ma jikọta ya, na-eme ka ọ dị mma maka ọnọdụ ngwa dị iche iche. Na mgbakwunye, elu nke mkpanaka plastik ABS dị nro ma dị mfe ịgbanwe, na-enye mgbanwe maka nhazi ọzọ.

 

3. Chemical Resistance

Mkpanaka plastik ABS nwere nguzogide siri ike nye ọtụtụ ihe ndị na-emepụta kemịkalụ, gụnyere acids, alkalis, solvents, wdg, na-eme ka ọ dị mma maka ojiji na ụlọ nyocha kemịkalụ, mmepụta mmepụta ihe, na ndị ọzọ. Ọ na-egosipụtakwa ihe mkpuchi ọkụ eletrik dị mma, nke kwesịrị ekwesị maka ịme ihe eletrik na akụrụngwa.

 

4. Ezi Thermal kwụsie ike

Mkpanaka ABS na-egosipụta nkwụsi ike dị mma na okpomọkụ dị elu, na-eguzogide nrụrụ na ịnọgide na-arụ ọrụ ya, na-eme ka ọ dị mma maka gburugburu okpomọkụ dị elu. Ọ nwekwara ezigbo ihe na-egbochi ọkụ, na-enye nchebe ụfọdụ ma ọ bụrụ na ọkụ.

 

Ngwa ABS Rod:

---

1. 3D obibi akwụkwọ

The ABS mkpanaka bụ ihe a na-ejikarị eme ihe maka mbipụta 3D, nwere ike ịmepụta ụdị nwere nkọwa zuru oke na ike. Enwere ike iji ya mepụta rọbọt, akụkụ, na ụdị mgbagwoju anya ndị ọzọ.

 

2. Nhazi

The ABS plastic mkpanaka adabara machining na n'ichepụta nke n'ibu components dị ka akụkụ, bearings, na partitions. Enwere ike iji ya mepụta ụdị ígwè ọrụ dị iche iche na ígwè ọrụ ígwè ọrụ.

 

3. Ime Nlereanya
N'ihi ịdị mfe nke nhazi na mgbanwe ya, a na-eji mkpanaka plastik ABS eme ihe n'ọtụtụ ebe na-emepụta ihe nlereanya, ọrụ aka, na mmepụta ihe. Enwere ike iji ya mepụta ụdị resin, ihe egwuregwu ụmụaka, ihe ọkpụkpụ, na ihe osise ndị ọzọ.

 

Nkọwa na nha:

---

Na mgbakwunye na nha nha, anyị na-enye mkpanaka plastik ABS ahaziri iche na nkọwapụta na nha dị iche iche iji gboo ihe achọrọ nke ọrụ dị iche iche na mkpa.

 

 

Data nka maka ABS Rod

---

Mba	Ihe nyocha	unit	Test N'ihi	Test Method
1	njupụta	g / cm	1.413	ASTM D792-2013
2	Ike ọdụdọ	Mpa	66.6	GB/T 1040.2/1B-2006
3	Ike elongation	%	24	GB / T 9341-2008
4	Ekwe Ike	Mpa	102	GB / T 9341-2008
5	Mgbanwe Mgbanwe nke Elasticity	Mpa	2820	GB/T 1043.1/1eA-2008
6	Ike mmetụta Charpy Notched	KJ/m²	7.8	GB / T 13520-1992
7	Mmetụta Bọọlụ Ike	/	Enweghị mgbawa	GB / T 1633-2000
8	Vicat Okpomọkụ Nguzogide (1kg,50℃/h)	℃	163	GB / T 22789.1-2008
9	Ọnụego mgbanwe nha ọkụ (ogologo ogologo)	%	0.08	GB / T 22789.1-2008
10	Ọnụego mgbanwe nha oku oku (transverse)	%	0.04	GB / T 22789.1-2008
11	Rockwell Hardness (R)	/	118	GB / T 3398.2-2008
12	Ọnụ ahịa nguzogide elu	Ω	8.5 x10^12	GB / T 31838.2-2019
13	Ọnụego nguzogide olu	Ω.m	1.3 x10^12	GB / T 31838.2-2019
14	Dielectric Constant (1MHZ)	/	3.7	GB / T 1409-2006
15	Mfu ọkụ eletrik (1MHZ)	/	0.055	GB / T 1409-2006
16	Ike Dielectric	KV / mm	6.93	GB / T 1408.1-2016
17	Ọnụọgụ esemokwu	/	0.18	GB / T 3960-2016

 

Factory

---

J&Q New Composite Material Group Co., Ltd bụ onye nrụpụta mba nke ihe mkpuchi mkpuchi yana Epoxy Resin, Plastic Injinia. Anyị nwere ụlọ mmepụta ihe abụọ. Ha dị na Heibei Province. Otu bụ Hongda mkpuchi ihe Factory e tọrọ ntọala na 2000. Ekpuchi ebe 30000 square mita. Ngwá ọrụ usoro dị elu, akụrụngwa nyocha zuru oke. Ngwá ọrụ anyị niile bụ ụlọ ọrụ mmepụta ihe na-akpaghị aka. tumadi mmepụta bụ 3420 epoxy mpempe akwụkwọ ọkwa B, Kwa afọ mmepụta nke ihe karịrị 13000 tọn. ọ bụ onye nrụpụta akwụkwọ ọkwa ọkwa B kachasị na China. Na nweta otu n'eziokwu na ntụkwasị obi na ngalaba ntụkwasị obi afọ ojuju ndị ahịa na nkwanye ugwu ndị ọzọ gọọmentị nyere. anyị gafere ISO 9001 Quality Management System Asambodo.

Nke ọzọ bụ Hebei JingHong Electronic Technology Co., Ltd Ekpuchi ebe 66667 square mita. Ngụkọta ntinye ego nke nde 200 CNY, mmepụta kwa afọ bụ tọn 30,000. JingHong bụ ụlọ ọrụ ihe ọhụrụ na-ejikọta nyocha sayensị, mmepe, mmepụta, ahịa, na ọrụ. Ngwaahịa ndị bụ isi bụ mpempe akwụkwọ FR4, 3240 epoxy mpempe akwụkwọ ọkwa A, mpempe akwụkwọ phenolic, mpempe akwụkwọ Bakelite, laminate ọla kọpa, Epoxy Resin na Injinia Plastic, nke nwere mmepe ngwaahịa mkpuchi siri ike na ikike mmepụta. JingHong nwere igwe gluu kachasị elu, compressor thermal, na igwe gluu elu kwụ ọtọ nke edobere maka mpempe akwụkwọ FR4 nwere ike hụ na ngwaahịa kacha mma na nke kwụsiri ike.

Anyị na-ebu ụzọ kwalite ịdịmma, iguzosi ike n'ezi ihe. Ka ọ dị ugbu a, anyị nwere ihe karịrị afọ 20 nke ahụmahụ n'ịmepụta na ire ihe mkpuchi mkpuchi na ihe karịrị afọ 10 nke ahụmahụ mbupụ. A na-ebupụ ngwaahịa na Russia, Ndịda Ebe Ọwụwa Anyanwụ Eshia, United States, Europe, na mba ndị ọzọ, na ọnụ ọgụgụ mbupụ kwa afọ bụ 40% nke mkpokọta mbupụ na China. Ihe ọzọ bụ na anyị nwere ụlọ ọrụ logistics nke anyị, yabụ anyị nwere ike ịnye ọrụ nkwụsịtụ. Na-atụ anya imekọ ihe ọnụ ogologo otu.

Asambodo

---

 

ngosi

---

 

Nkwakọ ngwaahịa na Mbupu

---

 

FAQ

---

Ajụjụ: Ị bụ ụlọ ọrụ azụmaahịa ma ọ bụ nrụpụta?

A: Anyị bụ ndị nrụpụta.

 

Ajụjụ: Ị nwere ike ịnye m ọnụ ahịa mbelata?

A: Ọ dabere na ọnụọgụgụ.

 

Ajụjụ: Kedu asambodo ị nwere?

A: Anyị factory agafeela akwụkwọ nke ISO 9001 àgwà usoro asambodo;

Ngwaahịa agafeela ule ROHS.

 

Ajụjụ: Enwere m ike ịnweta nlele efu?

A: Free sample dị.

 

Ajụjụ: Ogologo oge ole ka oge nnyefe dị?

A: N'ozuzu, ọ bụ 10-15 ụbọchị ma ọ bụrụ na ngwaahịa bụ na ngwaahịa, ma ọ bụ 5-10 ụbọchị.

 

Ajụjụ: Gịnị bụ ugwo?

A: Ịkwụ Ụgwọ <= 1000USD, 100% tupu oge eruo

Ịkwụ ụgwọ> = 1000USD 30% TT n'ihu, 70% TT tupu mbupu.